SMART Error Log Version: 1
ATA Error Count: 1
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 5282 hours (220 days + 2 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 00 00 00 00 00  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  00 00 00 00 00 00 00 ff  11d+05:33:10.232  NOP [Abort queued commands]
  b0 d4 00 82 4f c2 00 00  11d+05:32:50.043  SMART EXECUTE OFF-LINE IMMEDIATE
  b0 d0 01 00 4f c2 00 00  11d+05:32:49.986  SMART READ DATA
  ec 00 01 00 00 00 00 00  11d+05:32:49.976  IDENTIFY DEVICE
  ec 00 01 00 00 00 00 00  11d+05:32:49.976  IDENTIFY DEVICE

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended captive    Interrupted (host reset)      90%      5282         -
# 2  Conveyance offline  Completed without error       00%      1463         -